What is Mixing and Why Does My Song Need it?

You’ve made the courageous leap and decided to release some music, but you want to do it the right way. It’s a huge undertaking, from finding the right studio to planning promotional content. The creative stuff can be so fun, the prep and logistics can be overwhelming, and the more research you do on processes like distribution, mixing, and mastering, it seems the more there is to know.

There are thousands of resources claiming to teach you the “basics” of audio mixing that still leave you confused. Don’t feel stupid! There are entire degree programs dedicated to this topic, and we can’t all be experts in everything. However, if you’re going to release your music to the public and pay for the service, you should know what it is and why you need it. We’re going to answer some questions to make it all seem a little less scary. Let’s start at the beginning.

Does my song need to be mixed?

Yes. That’s an easy one, next!

Why?

A song well-mixed is like indulging in a cup of really great Ethiopian pour-over after living the last 7 years on diner drip coffee. You had no clue you were missing that kind of quality until after you got a taste of it! Still, as with coffee, there is an adjustment period while you refine your palate. Hearing that raw file (diner drip) and then hearing the first pass of a mix (Ethiopian), will reveal clear sonic differences and improvements in quality even to the most undiscerning of ears. However, it takes practice, patience, and curiosity to start to identify the subtle magic; like tasting notes in coffee.

Okay fine. Then what even is mixing?

Most basically (and vaguely, to start), mixing audio is the process of controlling several aspects of sound within and between multiple audio tracks to create an overall sense of cohesion, balance, and artistry. It requires a combination of both technical knowledge and skill, and creative intuition and awareness. Sound is a science, but it is also an art.

The basic targets of mixing sound deal with balancing levels, frequencies, and stereo image (more on this later) to provide sonic clarity to the listener, while creating something more interesting and pleasing to the ear than any raw audio file could ever be. A good audio engineer will take all of the individual audio tracks and apply all sorts of effects, filters, and techniques to make them sound more cohesive; like a family of sound rather than a bunch of strangers shoved together in the same room. This process occurs within a digital audio workstation (DAW), which consists of three components: a computer, an audio interface (a device that converts audio from mics, mic pre-amps, or a mixer into a signal for the computer), and a recording software.

The Basics:

Let’s begin our descent down the rabbit hole. Most of these definitions come straight from the Bartlett & Bartlett text “Practical Recording Techniques: The Seventh Edition.” Then, we’re going to try to break each down a little and add some context. It will be helpful to imagine your song existing in three-dimensional space; aspects of sound within your mix can move up and down, forward and backward, and side to side. Mixing audio in many ways is about sliding sounds along those different axes to create a rich and compelling sonic product.

Frequency: “The number of cycles per second of a sound wave or audio signal, measured in hertz (Hz).”

Sound waves travel quickly (high frequency/pitch) or slowly (low frequency/low pitch), or lots of speeds in between. Oftentimes in raw recorded audio, there are extra, unnecessary frequencies that “muddy” up the mix, or make it sound messy or garbled to our simple human ears/brain. To fix that, audio engineers will EQ the tracks.

Equalization (EQ): “Adjustment of frequency response to alter the tonal balance or attenuate unwanted frequencies levels.”

Stay with us. We EQ tracks to cut (remove) unwanted frequencies, or boost (increase) frequencies we like or need more of in order to make the overall mix more clear, crisp, and colorful. You can apply highpass filters (HPF) or lowpass filters (LPF) to make the best/necessary elements within tracks stand out, and get rid of the frequencies that muddy the mix. An audio engineer might apply a HPF to a guitar track to remove extra frequencies going on in the low end, and then go in more thoroughly to cut or boost specific frequencies to curate a more intentional sound.

If we are imagining our song in three-dimensional space, this is the axis that runs up and down. Soundwaves manifest as bass (low; 60-120 Hz), mid (middle; 400-2.5k Hz), and treble (high; 8k-15k Hz) frequencies.

Compressor: “A signal processor that reduces dynamic range or gain by means of automatic volume control.” Compression has to do with level, or volume control. Recording real musicians often means a wide dynamic (volume) range. A compressor automatically reduces gain (amplification) when the signal exceeds a preset level (threshold).

This is the part of mixing that happens on the axis running forward to back; think of it as someone stepping closer to you/the microphone (your ear will interpret this as louder) or away (softer).

Panning: “The act of placing or moving a sound anywhere in the stereo field of a stereo playback system.”

We experience recorded music through a stereo system, meaning there is a left and a right speaker (even in your phone). This tricks our brains into processing audio as if it’s coming from a single, center source, creating what we call a phantom image.

Before mixing, all tracks more or less sit “center.” This not only sounds flat and singular, but also auditorily confusing. Our brains struggle to isolate instruments, tracks, or interpret anything interesting going on. Panning combats that by spreading the sound sources of the tracks out along that left-to-right axis. When our brains can organize and localize the different tracks, it allows for certain instruments, embellishments, and tonal qualities to shine through that might otherwise be lost.

These components are only the beginning. There are tons of effects like reverb, chorus, echo, and more that enhance depth, mood, and tone of the song, and plenty of space for a mixing engineer to get creative and take the tune to the next level. The best way to learn more about what makes a good mix and your audio preferences, is to stay curious. Ask your audio engineer lots of questions, do your research (think podcasts, articles, books, YouTube videos), listen to different kinds of music and start to try to identify elements of the sound that you like. If you want, make your audio engineer a playlist of reference tracks with sonic elements that move the needle for you. Remember, you don’t need to know everything to start speaking the language, you just need to start speaking it.

***Written by Singer/Songwriter Kayla Lunden

Read More